BIO & CAT DENOX SCR
CLEAN POWER A3®
THE DEFINITIVE SOLUTION FOR THE REGENERATION OF INDUSTRIAL SCR CATALYSTS DeNOx, DeDIOx AND CO RESTORING THE CONDITIONS LIKE NEW
The SCR catalysts, that is Selective Catalytic Reduction, after a certain number of hours work, have a physiological decrease in reaction activity due to the pollutants who transit us and are deposited.
Some of these components, such as calcium "tend to form the so-called" gessatura "effect, which in the long run closes a part of the ceramic porosity by decreasing the reaction area of the follicles that translates into a lower NOx conversion activity .
In this situation it comes to decrease the so-called "sponge effect". The catalyst once saturated by pollutants releases everything that no longer succeeds in retraining, triggering a process of deactivation where the presence of pollutants in the fumes increases exponentially.
The solution proposed by Bio Protect Group, avoids huge investments for replacing Denox-Scr catalysts, our reaction activity regeneration process, generates investment savings worth 50/60% of the entire investment.
With our regenerative procedure you get the restoration of the micropority of the ceramic structure by reactivating the functionality of the catalytic reaction, the whole regenerative process is carried out in our Italian headquarters.
The regenerative process is suitable for reactivation, on all catalyst models, including the pellet type produced by the shell. Bio Protect Group plays on this type of catalyst, also the screening and suction activity of powders.
Bio Protect Group, in addition to the regeneration of the SCR elements, offers the service for the structural restoration of metal containers on all modules of industrial catalysts.
The regenerative process of Bio Protect Group adapts to the regeneration of the Oxidizing Coatalys of the CO with excellent proven results.
Given the remarkable cost of the CO oxidants containing the expensive metal platinum, with regeneration you can have considerable savings in the order of tens of thousands of euros.
The Bio Protect Group provides:
- Complete layer of regenerated catalyst.
- The recovery service of the deteriorated modules, carrying out sandblasting and repainting with high temperature paints.
- The catalyst monoliths both singles and in carbon steel metal containers ready for use.
- New and / or regenerated catalysts.
Thanks to international agreements, Bio Protect Group can provide new catalysts for NOx oxidation and CO.
The regenerative process that is used by Bio Protect Group is covered by industrial secret and respects the environmental rules of reference, not producing hazardous waste.